AP19576899 Development of composite materials based on magnetite and 2D nanostructures and their use for water purification and desalinization
Objective of the project:
The goal of the project is to develop and optimize composite materials based on magnetite and 2D nanostructures in order to create an effective system for water purification and desalinization . This project aims to explore the synergistic effects between magnetite and 2D nanomaterials such as graphene , graphene dioxide and others, with the aim of improving the adsorption and catalytic properties of the materials.
Relevance of the project:
The relevance of the project to develop composite materials based on magnetite and 2D nanostructures for water purification and desalinization is explained by several factors. The lack of accessible clean water is becoming an increasingly pressing problem in various regions of the world due to population growth, climate change and pollution of water sources. With increasing water pollution and the threat of fresh water shortages, the demand for innovative treatment and desalinization technologies that can provide safe drinking water is growing. Composite materials based on magnetite and 2D nanostructures promise to have high efficiency in water purification due to a combination of adsorption and catalytic properties. Their use can be more cost-effective compared to traditional cleaning methods. Thus, the development and use of composite materials based on magnetite and 2D nanostructures for water purification and desalinization is an important and promising area of research that makes a significant contribution to solving global problems of water supply and providing clean drinking water.
Scientific supervisor: Lesbaev A.B.
Results obtained: project start – 2023.
Implementation period: 2023-2025.
Scientific projects of the university
- DP21681546 "Modernization of sprinkler drive for crop irrigation using innovative resource-saving composite materials"
- AP19177970 Improvement of the technology for manufacturing a pump part body from fiberglass
- AP19674691 – Development, research and industrial testing of mathematical models and intelligent process control algorithms for the production of premium quality phosphoric acid
- IRN AR08857319 “Research on ways to increase the heat transfer characteristics of a vertical type borehole soil heat exchanger to ensure high productivity of heat pumps”
- AP19676743Development of methods for calculating the scheme of unbalanced solutions, operating modes of a geotechnological blocks and the creation of a geotechnological information system for efficient recovering by In-Situ Leaching
- 757.МОН.ГФ.15.ИПС.1 Increasing the competitive potential of the Republic of Kazakhstan
- 757.МОН.ГФ.15.ИПС.2 «Socio-economic, environmental, architectural and planning foundations for the development of urban agglomerations in the Republic of Kazakhstan»
- AP0120РК00498 «Principles of training highly qualified personnel for Kazakhstan in the field of architecture and urban planning, competitive in the context of globalization and the search for national identity»
- IRN: AP19679041 Research and application of fiber-optic strain sensors for monitoring the stressed state of metal and concrete structures
- IRN AP14971907 “Development of a frequency-based reliable system for detecting suspicious drones using SDR and acoustic signatures”
- IRN: AP14971031 “Research and implementation of a bimodal system for detecting unmanned aerial vehicles in real time”
- IRN: AP19679602 “Development of a tethered unified dual-use multicopter platform with an inverter with increased frequency switching and high coefficient voltage conversion"
- AP19675961– Development and research of keys distribution protocols based on quantum properties
- AP 06851287 – Development of a block symmetric encryption algorithm
- BR21882237-OT-23 Development and research of promising composite materials for energy and fuel cycle
- AP14871210 Study of the influence of hydrogenation and helium embrittlement processes in materials for dispersed nuclear fuel of HTGR type reactors
- AP14972926 Preparation and study of lithium-alloyed materials with a highly porous structure for use as the anode of lithium-ion batteries
- AP19679049 Thermodynamic and radiation properties of dense degenerate plasma
- AR19679536 Study of the properties of positrons generated by runaway electrons in fusion reactors with magnetic confinement
- AR19676689 Dynamic and electrodynamic properties of plasma in an extreme state
- AP19679690 Development of composite materials based on carbon nanotubes and magnetite nanoparticles for use as a radio-absorbing material for microwave radiation
- AP19576899 Development of composite materials based on magnetite and 2D nanostructures and their use for water purification and desalinization
- AP19174728 Study of the Efficiency Limit of Organometallic Perovskites Based on CH3NH3SnI3 and CH3NH3PbI3 for Photovoltaics
- AP13068313 Development of a new design of a modular wind turbine with a fixed vertical axle
- AP19676107 Development of technology for complex processing of industrial waste from vanadium production
- AP13268858 “Research on the technology for producing microdispersed high-purity silicon oxide and metallurgical silicon from asbestos production waste”
- IRN AR19680477 “Development of a comprehensive technology for processing nickel-cobalt-containing ores using pyro- and hydrometallurgical processes"
- AP19175411 – Development of a comprehensive technology for intensifying the electrolysis process in the production of copper cathode
- AP15473200 – Development of technology for processing oxidized ores with preliminary high-temperature sulfidization
- AP14871587– Development of a comprehensive technology for reducing theft formation during liquid-liquid extraction of copper
- IRN BR21881939 “ Development of resource-saving energy-generating technologies for the mining and metallurgical complex and creation of an innovative engineering center”
- BR11765599-OT-23 Development and improvement of natural water purification technologies and improvement of drinking water quality in the regions of Kazakhstan.
- AP19178044 Design and development of the print head of a construction 3D printer for the construction of military construction projects
- IRN: AP19679899 «Research and development of a manipulator which compensating deviations of a construction 3D printer based on a concrete pump truck and positioning the PrintHead»
- AP19679253 – «Research and development of a multifunctional mobile metal 3D printer»
- Scientific and technical support for energy saving during transportation of oil and oil mixtures along the oil pipeline routes of “KAZTRANSOIL” JSC
- AP09562886 "Development of water-absorbing composite materials based on N, N - dimethylacrylamide for plant growth"
- AP09563188 "Scientific and methodological substantiation of the criteria for the outburst hazard of moraine-glacial lakes and the assessment of the degree of potential risk from their outbursts"
- AP09260644 "Development of an effective multifunctional encapsulating composition to increase the yield of legumes"
- AP09260842 «Research, development, implementation of innovative dust removal technology in Almaty metro using circulating flows from piston action of moving trains»
- AP09260105 "Development of mathematical foundations and 3D simulation model of the process of underground bacterial leaching of uranium"
- AP09259295 On the algebraic and definable closures in new strongly minimal theories
- AP09260760 «Scientific foundations for synthesis and research of elastic and mechanically tough polyampholyte hydrogels for design of adaptive smart materials»
- AP09261282 "Increasing the service life of pumps of sucker rod pumping units for oil production"
- AP09261035 "Development of a highly efficient system for diagnosing the stress-strain state of a rock mass and spatio-temporal analysis of the development of deformation processes throughout the field"
- AP09259637 "Development of a highly efficient non-waste technology for the disposal of ash from coal combustion with the production of marketable products."
- AP09259251 "Studying the deterioration of permeability at the micro and macro levels in activities to stimulate production"
- Activated aluminum as an alternative source of energy and hydrogen in solving complex environmental problems of the oil industry", IRN - AP09260008
- AP09259631 Developing Technology of Mining and Processing Sands from Old Large-Volume Placers with Predominance Disseminate, Fine-Grained, Free and Fixed Gold (Takyr-Kaldjirskiy)
- AP09058620 «Web-GIS development based on complex geodynamic monitoring data for LTD "Kazakhmys Corporation" deposit field»
- AP09058297"Development of a new waste-free technology for the disposal of hot-dip galvanizing waste with the integrated extraction of valuable components"
- AP09058000 «Study on the catalytic mechanism and properties of materials for water-splitting in natural and artificial photosynthesis»
- AP09058419 Prediction of the characteristics of a porous medium, taking into account the modes of rock dissolution on a pore scale based on machine learning
- AP09058452 "Development of a PVT Model for Predicting Wax Deposition»
- AP08955550 "Principles of training highly qualified personnel for Kazakhstan in the field of architecture and urban planning, competitive in the context of globalization and the search for national identity"
- AP08957443 "Scientific rationale for the selection of hyperaccumulator plants for phytoremediation of soils contaminated with heavy metals in Almaty"
- AP19678995 – Development of a speaker recognition method using deep neural networks with ultra-short duration of pure speech
- AP14869972 – Development and adaptation of computer vision and machine learning methods for solving precision agriculture problems using unmanned aerial systems
- AP09259587 – Developing methods and algorithms of intelligent GIS for multi-criteria analysis of healthcare data
- BR 10965172 – Space monitoring and GIS for quantifying soil salinity and degradation of agricultural land in southern Kazakhstan
- ИРНAP19675226 – Intelligent credit system for the manufacturer/importer of goods
- AP08956439 "Development of innovative water-saving technologies using new biopolymer moisture sorbents for arid climatic zones"
- AP08052829 Development of complex treatment hybrid technology of oxidized, resistant zinc, lead-bearing ores and beneficiation middlings by sulphidizing roasting with subsequent cinder enrichment
- AP05133041 Development of a cyanide-free technology for the extraction of gold from difficultly processing natural and man-made mineral raw materials
- AP08053222 Development of a hydropulse generator for enhancing the effectiveness of well drilling in complex mining and geological conditions
- AP08957241 "Development of polymer-metal multilayer nanocatalysts"
- AP08956794 "Study of physical and mechanical properties of damping alloys with nanostructured coating for critical parts of road transport"
- AP08856630 "Assessment of the quality of spatial electromagnetic noise in active information protection systems"
- AP08855607 "Digital technology for optimizing the cyclic pumping of highly solidifying and high-viscosity oil mixtures"
- AP08856141 “Development of a topological optimization method based on Deep Learning and GPU-accelerated computations for creating aerodynamic structures”
- AP08856412 "Development of intelligent data processing and flight planning models for solving the problems of precision farming using UAVs"
- AP08856867 "Development and testing of intelligent algorithms for optimal control of the technological process of purification of yellow phosphorus in the conditions of the NDPP"
- AP08857522 "Development of parallel manipulators of the RoboMech class"
- AP08857201 «Development of a highly efficient rock cutting tool for drilling wells equipped with synthetic diamonds and composite diamond-containing cutters with high strength and heat resistance»
- AP08856422 «Development of an innovative technology for intensifying downhole uranium mining using a hydrodynamic decolmatization device in combination with a complex of multifunctional chemicals»
- AP08857097 «Comprehensive monitoring of slow deformation processes of the earth’s surface during the large-scale development of ore deposits in Central Kazakhstan»
- АР08857087 Implementation of innovative mining transport systems and increasing the intensity of ore mining in deep pits in the conditions of the limit state of steep layers
- AP08855714 «Thermal insulation coatings based on finely dispersed mineral granular systems»
- AP08856384 "Development of a new high-tech technology for the utilization of SO2 and CO2 from waste gases of thermal power plants and metallurgical enterprises with the production of marketable products"
- AP08855521 «Study of the Transition of the Newtonian fluid flow to a viscoplastic state»
- AP08856173 "Synthesis and study of the properties of low-dimensional semiconductor materials for the creation of highly sensitive biosensors"
- AP08856926 «Determination of the aerodynamic characteristics of aircraft using a non-stationary nonlinear one-dimensional system of moment equations»
- AP08857516 «Metal-containing ionic liquids in agrochemistry»
- AP08857034 «Development of a new design of a pressing equipment and a chamber with a gas-dynamic installation with program control for the manufacture of additive technology of high-quality products»
- AP08857319 «Study of heat transfer enhancement mechanisms of vertical type borehole heat exchanger to ensure high heat pump performance»
- AP08857367 «Development of innovative technologies for improving energy efficiency and reliability of centrifugal pumps manufactured in Kazakhstan»